• Notice Overhead Crane Safety and Inspection Requirements

    Hook Check for damage, cracks, nicks, gouges, deformity of the throatdeformity of the throat opening, wear on saddle or load bearing point, and twist. Refer to the manual furnished by the original manufacturer of the crane or hoist. Daily Operator Inspection Requirements Hook Latch Check that hook latch, if ppgrovided, is not missing

  • Betriebsanleitung Operating Instructions

    The H 20 crane hook is a load-lifting device used for the transport of H 20 formwork elements by crane, which are built with H 20 timber beams. Another application is not permitted! The maximum load-bearing capacity of an H 20 crane hook is 500 kg (5 kN).

  • OEM Crane Parts - Replacement Hoist Parts | Crane Pro Parts

    Crane Pro Parts stocks crane-duty wound-rotor and Magnetorque™ motors for all crane motions, on any make or model of overhead crane. View More. Bottom Blocks. Crane Pro Parts stocks complete bottom blocks in a wide variety of sizes and configurations, as well as the common wear items such as hooks, frames, pins, sheaves, bearings and safety ...

  • Elebia | Automatic Crane Hooks | Smart Lifting Solutions

    evo Automatic Crane Hooks. The evo range of automatic hooks for cranes will boost the safety and productivity of your cranes. The patented evo automatic hooks range from the 2.5 tons capacity of the evo2 crane hook to 25 tons capacity and allow you to hook on and release any load without any additional handling. evo2. evo5. evo10c. evo10. evo20c.

  • 630 EC-H 20 Litronic

    630 EC-H 20 TOP CLIMBING with 550 HC Tower Sections Tied to structure 10 x 19'-0" (5.8m) = 190'-0" operating crane at maximum hook height. (58m) max.* Tie-In Assembly

  • Potain TOPKIT H20/14C Specifications CraneMarket

    This tower crane has a max lift capacity of 10 metric tons (11 U.S. tons), a maximum hook height with a horizontal jib that reaches out to 65 m (213 ft). The height of the lattice mast reaches 70.4 m (231 ft). There is a jib counterbalance needed for the crane when carrying heavier loads at higher altitudes.

  • Crane Hooks | McMaster-Carr

    Eye Hooks with Load-LockingLatch and Swivel— For Lifting. These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied. Eye Hooks with Load-Locking Latch— For Lifting. For a more secure connection than standard hooks, the latch locks ...

  • Crane Hook Assembly 3Т files - 3D CAD Model Library | GrabCAD

    Jul 12, 2021· Crane Hook Assembly 3Т. vip1990. July 12th, 2021. Crane Hook block is considered the complete component of the hoist and it's linked to the crane by …

  • Hooks & Swivels - General Catalog - The Crosby Group

    Crosby® A-350 Sliding Choker Hook, 3315 Snap & 1210 Reverse Eye. View Specifications.

  • POTAIN MR 295 H20 | Top-Slewing Cranes

    The MR 295 H20 is a mid-size luffing jib crane featuring a fixed counterweight that reduces several moving parts and creates a compact counterjib. Seven jib lengths are offered in 16.4 ft increments and two capacities are available.

  • Lifting Spreader Beams and Bars | Crane Lifting Tools

    Lifting Spreader Bar and Adjustable Beam Lifts. Our lifting spreader beams and bars allow you to turn a crane hook into a multiple point lifting tool. TSOC offers Short Span, Standard Duty, Basket Sling, Universal Lifting, Adjustable Lifting, Four Point Sack, Four Point Adjustable, and Adjustable Telescopic spreader beams for cranes. HSSLB.

  • 20t crane hook, 20t crane hook Suppliers and Manufacturers ...

    3,831 20t crane hook products are offered for sale by suppliers on Alibaba.com, of which bridge cranes accounts for 30%, hooks accounts for 1%, and material handling equipment parts accounts for 1%. A wide variety of 20t crane hook options are available to you, such as heavy industry, automotive industry, and general industry.

  • Home - Caldwell Lifting Solutions

    Founded in 1954, Caldwell is the leading manufacturer of below the hook lifting solutions. We provide you and your customers the best, most effective material handling solutions available. Our dedicated team of employee-owners take the time to fully understand your application. This understanding allows us to apply our experience and provide ...

  • 630ECH20 Litronic for PDF - Smedley Crane

    nation of all crane functions. This feature also permits a load increase of up to 10% as illustrated in the heavy lift mode (LM2) chart above. Heavy lift mode is permitted only when wind speed is less than 31 mph (50 kph). Contact Morrow for more information regarding the many features of the 630 EC-H 20 Litronic tower crane. Reinforcing steel ...

  • FreeCraneSpecs.com: P&H Omega 20 Crane Specifications/Load ...

    Crane Specification search result for manufacturer: P&H and model: Omega 20

  • Home - Hooks Crane

    Sep 10, 2018· Let's Lift. Serving Our Community since 1977 Hooks Crane's versatile equipment and skilled operators tackle a wide variety of lifts in nearly every setting. As a trusted crane rental company and crane service with over 40 years of experience, Hooks Crane is fully equipped to complete your lift safely and successfully. The Cranes Learn More…

  • P&H Crane Parts - P&H Overhead Cranes - Crane Pro Parts

    P&H® Crane Parts. P&H® built its first electric overhead crane in 1887, and soon began building its own line of motors to improve the reliability of its crane and hoist products, which became the gold standard for industrial use before the turn of the century. The same is true today: Only P&H® mechanical and electrical crane parts are built to meet the specifications for P&H overhead cranes.

  • Tower Cranes 550 EC-H 20 Litronic Specifications ...

    The 550 HC 20 is a freestanding tower crane with up to 3 different configurations. This crane has a maximum lift capacity of 20 metric tons (22 U.S. tons). The horizontal jib has a maximum length of 80.8 m (265 ft). Different heights and tower combinations are available as well. Contact Seller.

  • Crane Hook Autocad Block | Peatix

    Crane Hook Autocad Block. Free CAD and BIM blocks library - content for AutoCAD, AutoCAD LT, Revit, Inventor, Fusion 360 and other 2D and 3D CAD applications by Autodesk. CAD blocks and files can be downloaded in the formats DWG, RFA, IPT, F3D. You can exchange useful blocks and symbols with other CAD and BIM users.

  • HOOKS – H. Henriksen

    Henriksen Hooks have been widely seen as a benchmark for decades, and is a firmly established trademark for professionals in the maritime and offshore segment. The operational safety, simplicity and working reliability of the Henriksen Hooks is key for our customers and users. We also provide an established and operational exchange and re ...

  • Overhead Crane Parts | Hoist Parts

    They know how the systems are installed, inspected and fabricated, making them ideal for the most complex or simple crane issue. OSHA Overhead Crane Inspections. TSOC can provide you with an overhead crane inspection to meet the OSHA 1910.179. OSHA requires top running overhead cranes to have the hook, wire rope and chains inspected monthly.

  • HOOK BLOCKS - CRANE HOIST - Casey USA

    Hook blocks, often called overhead crane block, crane bottom blocks or hoist block, are below-the-hook crane lifting equipment. Casey has numerous hook blocks in stock ranging from 5 ton to 180 ton.

  • 630 EC-H 20

    630 EC-H 20 Hammerhead Tower Crane MEC-MKT-1302 1/23/19 1. 57'-5" 17.5m 90'-3" 27.5m 273'-7" (83.4m) Jib5 Tip Radius " 1-' 5 1 m 6. 4 r a h c 0 t h g i e h m k o o h (e e S-': E T O N. w o l e b (s t ... 1 Lower top climbing unit to base of crane prior to operating at maximum hook height. Hook Heights No. of Tower Hook Height Hook Height Tower ...

  • RIGGING BASICS - University of Texas at Arlington

    Rigging equipment shall not be loaded in excess of its recommended safe working load, as prescribed in Tables H-1 through H-20 in this subpart, following 1926.252(e) for the specific equipment. Rigging equipment, when not in use, shall be removed from the immediate work area so as not to present a hazard to employees.

  • Notice Overhead Crane Safety and Inspection Requirements

    Hook Check for damage, cracks, nicks, gouges, deformity of the throatdeformity of the throat opening, wear on saddle or load bearing point, and twist. Refer to the manual furnished by the original manufacturer of the crane or hoist. Daily Operator Inspection Requirements Hook Latch Check that hook latch, if ppgrovided, is not missing

  • Betriebsanleitung Operating Instructions

    The H 20 crane hook is a load-lifting device used for the transport of H 20 formwork elements by crane, which are built with H 20 timber beams. Another application is not permitted! The maximum load-bearing capacity of an H 20 crane hook is 500 kg (5 kN).

  • OEM Crane Parts - Replacement Hoist Parts | Crane Pro Parts

    Crane Pro Parts stocks crane-duty wound-rotor and Magnetorque™ motors for all crane motions, on any make or model of overhead crane. View More. Bottom Blocks. Crane Pro Parts stocks complete bottom blocks in a wide variety of sizes and configurations, as well as the common wear items such as hooks, frames, pins, sheaves, bearings and safety ...

  • Elebia | Automatic Crane Hooks | Smart Lifting Solutions

    evo Automatic Crane Hooks. The evo range of automatic hooks for cranes will boost the safety and productivity of your cranes. The patented evo automatic hooks range from the 2.5 tons capacity of the evo2 crane hook to 25 tons capacity and allow you to hook on and release any load without any additional handling. evo2. evo5. evo10c. evo10. evo20c.

  • 630 EC-H 20 Litronic

    630 EC-H 20 TOP CLIMBING with 550 HC Tower Sections Tied to structure 10 x 19'-0" (5.8m) = 190'-0" operating crane at maximum hook height. (58m) max.* Tie-In Assembly

  • Potain TOPKIT H20/14C Specifications CraneMarket

    This tower crane has a max lift capacity of 10 metric tons (11 U.S. tons), a maximum hook height with a horizontal jib that reaches out to 65 m (213 ft). The height of the lattice mast reaches 70.4 m (231 ft). There is a jib counterbalance needed for the crane when carrying heavier loads at higher altitudes.

  • Crane Hooks | McMaster-Carr

    Eye Hooks with Load-LockingLatch and Swivel— For Lifting. These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied. Eye Hooks with Load-Locking Latch— For Lifting. For a more secure connection than standard hooks, the latch locks ...

  • Crane Hook Assembly 3Т files - 3D CAD Model Library | GrabCAD

    Jul 12, 2021· Crane Hook Assembly 3Т. vip1990. July 12th, 2021. Crane Hook block is considered the complete component of the hoist and it's linked to the crane by …

  • Hooks & Swivels - General Catalog - The Crosby Group

    Crosby® A-350 Sliding Choker Hook, 3315 Snap & 1210 Reverse Eye. View Specifications.

  • POTAIN MR 295 H20 | Top-Slewing Cranes

    The MR 295 H20 is a mid-size luffing jib crane featuring a fixed counterweight that reduces several moving parts and creates a compact counterjib. Seven jib lengths are offered in 16.4 ft increments and two capacities are available.

  • Lifting Spreader Beams and Bars | Crane Lifting Tools

    Lifting Spreader Bar and Adjustable Beam Lifts. Our lifting spreader beams and bars allow you to turn a crane hook into a multiple point lifting tool. TSOC offers Short Span, Standard Duty, Basket Sling, Universal Lifting, Adjustable Lifting, Four Point Sack, Four Point Adjustable, and Adjustable Telescopic spreader beams for cranes. HSSLB.

  • 20t crane hook, 20t crane hook Suppliers and Manufacturers ...

    3,831 20t crane hook products are offered for sale by suppliers on Alibaba.com, of which bridge cranes accounts for 30%, hooks accounts for 1%, and material handling equipment parts accounts for 1%. A wide variety of 20t crane hook options are available to you, such as heavy industry, automotive industry, and general industry.

  • Home - Caldwell Lifting Solutions

    Founded in 1954, Caldwell is the leading manufacturer of below the hook lifting solutions. We provide you and your customers the best, most effective material handling solutions available. Our dedicated team of employee-owners take the time to fully understand your application. This understanding allows us to apply our experience and provide ...

  • 630ECH20 Litronic for PDF - Smedley Crane

    nation of all crane functions. This feature also permits a load increase of up to 10% as illustrated in the heavy lift mode (LM2) chart above. Heavy lift mode is permitted only when wind speed is less than 31 mph (50 kph). Contact Morrow for more information regarding the many features of the 630 EC-H 20 Litronic tower crane. Reinforcing steel ...

  • FreeCraneSpecs.com: P&H Omega 20 Crane Specifications/Load ...

    Crane Specification search result for manufacturer: P&H and model: Omega 20

  • Home - Hooks Crane

    Sep 10, 2018· Let's Lift. Serving Our Community since 1977 Hooks Crane's versatile equipment and skilled operators tackle a wide variety of lifts in nearly every setting. As a trusted crane rental company and crane service with over 40 years of experience, Hooks Crane is fully equipped to complete your lift safely and successfully. The Cranes Learn More…

  • P&H Crane Parts - P&H Overhead Cranes - Crane Pro Parts

    P&H® Crane Parts. P&H® built its first electric overhead crane in 1887, and soon began building its own line of motors to improve the reliability of its crane and hoist products, which became the gold standard for industrial use before the turn of the century. The same is true today: Only P&H® mechanical and electrical crane parts are built to meet the specifications for P&H overhead cranes.

  • Tower Cranes 550 EC-H 20 Litronic Specifications ...

    The 550 HC 20 is a freestanding tower crane with up to 3 different configurations. This crane has a maximum lift capacity of 20 metric tons (22 U.S. tons). The horizontal jib has a maximum length of 80.8 m (265 ft). Different heights and tower combinations are available as well. Contact Seller.

  • Crane Hook Autocad Block | Peatix

    Crane Hook Autocad Block. Free CAD and BIM blocks library - content for AutoCAD, AutoCAD LT, Revit, Inventor, Fusion 360 and other 2D and 3D CAD applications by Autodesk. CAD blocks and files can be downloaded in the formats DWG, RFA, IPT, F3D. You can exchange useful blocks and symbols with other CAD and BIM users.

  • HOOKS – H. Henriksen

    Henriksen Hooks have been widely seen as a benchmark for decades, and is a firmly established trademark for professionals in the maritime and offshore segment. The operational safety, simplicity and working reliability of the Henriksen Hooks is key for our customers and users. We also provide an established and operational exchange and re ...

  • Overhead Crane Parts | Hoist Parts

    They know how the systems are installed, inspected and fabricated, making them ideal for the most complex or simple crane issue. OSHA Overhead Crane Inspections. TSOC can provide you with an overhead crane inspection to meet the OSHA 1910.179. OSHA requires top running overhead cranes to have the hook, wire rope and chains inspected monthly.

  • HOOK BLOCKS - CRANE HOIST - Casey USA

    Hook blocks, often called overhead crane block, crane bottom blocks or hoist block, are below-the-hook crane lifting equipment. Casey has numerous hook blocks in stock ranging from 5 ton to 180 ton.

  • 630 EC-H 20

    630 EC-H 20 Hammerhead Tower Crane MEC-MKT-1302 1/23/19 1. 57'-5" 17.5m 90'-3" 27.5m 273'-7" (83.4m) Jib5 Tip Radius " 1-' 5 1 m 6. 4 r a h c 0 t h g i e h m k o o h (e e S-': E T O N. w o l e b (s t ... 1 Lower top climbing unit to base of crane prior to operating at maximum hook height. Hook Heights No. of Tower Hook Height Hook Height Tower ...

  • RIGGING BASICS - University of Texas at Arlington

    Rigging equipment shall not be loaded in excess of its recommended safe working load, as prescribed in Tables H-1 through H-20 in this subpart, following 1926.252(e) for the specific equipment. Rigging equipment, when not in use, shall be removed from the immediate work area so as not to present a hazard to employees.