• Crane Kits_Cranes & Components_Nanjing Ram Machinery Co.,ltd

    ② End truck. Our end truck with wheels are driven by motors, which have a function of running along the track to help the crane move longitudinally. The duty cycle of end truck is 40% ED. ③ Trolley. The trolley and crane adopt three-trinity driving mechanism, frequency stepless speed regulating, hard-tooth surface, disc brake.

  • Overhead Crane and Hoist Terminology

    End Tie: A structural member other than the end truck which connects the ends of the girders to maintain the squareness of the bridge. End Trucks: Located on either side of the span, the end trucks house the wheels on which the entire crane travels. These wheels ride on the runway beam allowing access to the entire length of the bay.

  • Hoisting & Rigging Fundamentals - Energy

    to end attachments The following should be looked for in a pre-use inspection: 1) Broken wires. 2) Severe localized abrasion or scraping. 3) Kinking, crushing, birdcaging, or any other damage resulting in distortion of the rope structure. 4) Evidence of heat damage. 5) End attachments that are cracked, deformed, or worn to the extent that the

  • Kinocranes Crane End Truck Motor Driving System ...

    Kinocranes Crane End Truck Motor Driving System. The crane end carriage insist by box shape body, bearing base, crane wheel, travel buffer,connection plate, travel sweep plate. The whole design adopts advanced Module design with light weight and high performance.

  • Crane End Carriage factory, Buy good quality Crane End ...

    Hollow Shaft End Carriage 3 Ton 5 Ton 10 Ton Double Girder Overhead Crane End Truck End Carriage Brief Introduction The end beam is the driving unit for track walking, which can be directly connected with the ... Read More. 18:03:57. 42CrMo Wheel 40m/Min Open Gear 10t Crane End Carriage ...

  • Mobile Overhead Crane

    Bridge Girder(s) - The principal horizontal beam of the crane bridge which supports the trolley and is supported by the end trucks. Runway - The rails, beams, brackets and framework on which the crane operates. Runway Rail - The rail supported by the runway beams on which the crane travels.

  • LX Model Electric Single Beam Suspension Crane, Crane ...

    According to different spans, the electric suspension crane's bracket is designed with 500mm, 750mm and 1000mm; the negative wheel pressure is not allowed on the opposite side, when the electric hoist runs full load to the end of bracket. Ends of both sides of main beam are designed with trolley running block and buffer.

  • Overhead Crane Terminology — Overhead Crane Consulting ...

    Overhead crane configuration such that the crane end truck wheels ride on the bottom flange of the runway beam. BRIDGE GIRDER (CRANE GIRDER)/ ANSI MH 27.1 Crane member on which carriers or trolleys travel, horizontally mounted between and supported by the end trucks.

  • Single Girder Under Running Overhead Crane System With ...

    h. The end trucks will have a minimum wheelbase of 1/8 of the crane's span. Each end truck will be carried on four (4) wheels running on anti-friction bearings. Wheels will be of machined steel, hardened to 300 –320 BHN, single flanged compound tread wheels capable of running on either wide flange or S-beam runway beams. The end trucks will

  • Crane End Trucks and Crane Kits by Yale, Lift-Tech ...

    Yale | Lift-Tech Crane Kits and End Trucks. Under-Running Angle Type End Trucks: Capacities: 1/2 through 2 ton, Span: Up to 30 feet. Crane end trucks are constructed out of heavy steel angles with pressed steel or forged wheels. Bridge crane kit comes with bolted steel safety lugs and hardware to attach to the bridge beam.

  • 2 Ton Gantry Crane Princess Auto - China Overhead Crane ...

    Jul 19, 2021· Overhead crane end carriage is a full set component of the overhead crane traveling mechanism which is fitted with both single girder and double girder overhead crane The end carriage includes geared motor frequency control motor full electromagnetic brake full hard surface reducer rubber buffer driving and driven...

  • Single Girder Underhung Motorized End Trucks - Harrington ...

    Harrington's UM motorized end trucks offer the benefit of an underhung space saving design and are recommended for heavy-duty, class "C" crane applications. End Truck frames are fabricated from MC channel to provide structural integrity and strength.

  • End Trucks & Bridge Drives | R&M Hoist - Crane Components

    About End Trucks End trucks carry the hoist and crane up and down the crane runway. R&M end trucks and bridge drives are available in a variety of top and underrunning configurations that are custom-designed to fit your crane's application. RTN & RSN Top Running End Trucks Mates with GES Bridge Drives Heavy-duty tube or box construction Double flanged wheels Rotating axle drive wheel …

  • Single girder overhead crane from DQCRANES | Hoist ...

    Apr 26, 2016· Bridge Girder(s) – The principal horizontal beam of the crane bridge which supports the trolley and is supported by the end trucks. Runway – The rails, beams, brackets and framework on which the crane operates. Runway Rail – The rail supported by the runway beams on which the crane …

  • Lifting safety - EHS DB.com

    Lifting equipment is any work equipment for lifting and lowering loads, and includes any accessories used in doing so (such as attachments to support, fix or anchor the equipment). There are three key terms used in reference to the Regulations: 'lifting equipment';'lifting operations'; and 'the load'. Examples of lifting equipment include: overhead cranes and their supporting runways patient ...

  • Crane Comp Drawings and Spec CSL-1002-0407

    END TRUCKS The end trucks are rigid steel weldments, reinforced at the wheel axles. The wheels are solid forged steel and rotate on two lifetime-lubricated ball bearings. The single flange wheels have compound tread for operation on American standard taper tread or flat flange beams. The spur reduction at the truck is accomplished by

  • Hoosier Crane | HSI 1/2 Ton Wall Bracket Tie Rod Jib Crane ...

    Manufacturer Part Number 311-1000-12. Availability Call for Price. Special Price $916.50 Regular Price $1,079.00. Quick overview. HSI Model 311 1/2 Ton Wall Bracket Tie Rod Jib Crane 12 Foot Span. Learn more. Send to a friend. Add to Favorites. Skip to the end of the images gallery.

  • End Trucks - Overhead Crane Kits

    Our overhead bridge crane end trucks are ideal for the do-it-yourselfer. View as Grid List Sort by Price: Low to High Price: High to Low Name: A to Z Name: Z to A

  • EMH End Trucks | EMH, Inc.

    EMH end trucks are high quality components, designed for reliability and economy. The steel structure of the end truck is a torsion-resistant box girder, prepared to be connected to the crane girder. Precise machining and exact alignment of the crane girder mounting plates ensure unsurpassed travel characteristics and long life.…

  • Ace Industries Inc. - Festoon System Parts & Accessories

    Festoon System Parts & Accessories. Results (31) Filter ». Sort By: Best Selling Relevance Low Price High Price Name A-Z. Products per page: 12 24 48 View All. DUCT-O-WIRE SINGLE WHEEL TROLLEY FOR ROUND CABLE (.045" - 0.91" DIAMETER) R-TR4A. Price: $13.00.

  • Single Girder Overhead Cranes_Cranes & Components_Nanjing ...

    Oct 13, 2018· 9.End Trucks | End Carriages | End Beams Located on either side of the span in cement column or metal bracket, the end trucks with gear motors house the wheels on which the entire crane travels. There are two sets of end trucks and gearboxes for one set of single girder overhead crane, specially designed gearbox adopts oblique gears and self ...

  • TM—Single Girder Top Running Motorized End Trucks

    • Longer or shorter end truck lengths are available—consult factory. TP—Single Girder Top Running Push End Trucks TP end trucks provide similar benefits to the top running motorized TM truck, but with push operation. Along with many important features, end truck kits include: two trucks; rubber bumpers; and bridge beam fastener set.

  • Specifications &Dimensions|Overhead Cranes|Cranes…

    Double Girder Overhead Traveling Cranes. This double girder overhead crane can be installed on traveling rails on the brackets of building pillars. The double rail type trolley runs along parallel girders suitable for larger capacity cranes, and also can utilize space below ceiling rafters, and so a …

  • Wall Bracket & Tie Rod Jib Cranes | Materials Lifting ...

    Boom is supported by a threaded tie rod connected to the boom at one end and connected with a bracket to the supporting wall or column at the other end. Capacity is the maximum weight the crane can support; this includes the trolley and hoist as well as the lifting load. Span is the distance from the pivot point to the end of the boom.

  • Crane Kits_Cranes & Components_Nanjing Ram Machinery Co.,ltd

    ② End truck. Our end truck with wheels are driven by motors, which have a function of running along the track to help the crane move longitudinally. The duty cycle of end truck is 40% ED. ③ Trolley. The trolley and crane adopt three-trinity driving mechanism, frequency stepless speed regulating, hard-tooth surface, disc brake.

  • Overhead Crane and Hoist Terminology

    End Tie: A structural member other than the end truck which connects the ends of the girders to maintain the squareness of the bridge. End Trucks: Located on either side of the span, the end trucks house the wheels on which the entire crane travels. These wheels ride on the runway beam allowing access to the entire length of the bay.

  • Hoisting & Rigging Fundamentals - Energy

    to end attachments The following should be looked for in a pre-use inspection: 1) Broken wires. 2) Severe localized abrasion or scraping. 3) Kinking, crushing, birdcaging, or any other damage resulting in distortion of the rope structure. 4) Evidence of heat damage. 5) End attachments that are cracked, deformed, or worn to the extent that the

  • Kinocranes Crane End Truck Motor Driving System ...

    Kinocranes Crane End Truck Motor Driving System. The crane end carriage insist by box shape body, bearing base, crane wheel, travel buffer,connection plate, travel sweep plate. The whole design adopts advanced Module design with light weight and high performance.

  • Crane End Carriage factory, Buy good quality Crane End ...

    Hollow Shaft End Carriage 3 Ton 5 Ton 10 Ton Double Girder Overhead Crane End Truck End Carriage Brief Introduction The end beam is the driving unit for track walking, which can be directly connected with the ... Read More. 18:03:57. 42CrMo Wheel 40m/Min Open Gear 10t Crane End Carriage ...

  • Mobile Overhead Crane

    Bridge Girder(s) - The principal horizontal beam of the crane bridge which supports the trolley and is supported by the end trucks. Runway - The rails, beams, brackets and framework on which the crane operates. Runway Rail - The rail supported by the runway beams on which the crane travels.

  • LX Model Electric Single Beam Suspension Crane, Crane ...

    According to different spans, the electric suspension crane's bracket is designed with 500mm, 750mm and 1000mm; the negative wheel pressure is not allowed on the opposite side, when the electric hoist runs full load to the end of bracket. Ends of both sides of main beam are designed with trolley running block and buffer.

  • Overhead Crane Terminology — Overhead Crane Consulting ...

    Overhead crane configuration such that the crane end truck wheels ride on the bottom flange of the runway beam. BRIDGE GIRDER (CRANE GIRDER)/ ANSI MH 27.1 Crane member on which carriers or trolleys travel, horizontally mounted between and supported by the end trucks.

  • Single Girder Under Running Overhead Crane System With ...

    h. The end trucks will have a minimum wheelbase of 1/8 of the crane's span. Each end truck will be carried on four (4) wheels running on anti-friction bearings. Wheels will be of machined steel, hardened to 300 –320 BHN, single flanged compound tread wheels capable of running on either wide flange or S-beam runway beams. The end trucks will

  • Crane End Trucks and Crane Kits by Yale, Lift-Tech ...

    Yale | Lift-Tech Crane Kits and End Trucks. Under-Running Angle Type End Trucks: Capacities: 1/2 through 2 ton, Span: Up to 30 feet. Crane end trucks are constructed out of heavy steel angles with pressed steel or forged wheels. Bridge crane kit comes with bolted steel safety lugs and hardware to attach to the bridge beam.

  • 2 Ton Gantry Crane Princess Auto - China Overhead Crane ...

    Jul 19, 2021· Overhead crane end carriage is a full set component of the overhead crane traveling mechanism which is fitted with both single girder and double girder overhead crane The end carriage includes geared motor frequency control motor full electromagnetic brake full hard surface reducer rubber buffer driving and driven...

  • Single Girder Underhung Motorized End Trucks - Harrington ...

    Harrington's UM motorized end trucks offer the benefit of an underhung space saving design and are recommended for heavy-duty, class "C" crane applications. End Truck frames are fabricated from MC channel to provide structural integrity and strength.

  • End Trucks & Bridge Drives | R&M Hoist - Crane Components

    About End Trucks End trucks carry the hoist and crane up and down the crane runway. R&M end trucks and bridge drives are available in a variety of top and underrunning configurations that are custom-designed to fit your crane's application. RTN & RSN Top Running End Trucks Mates with GES Bridge Drives Heavy-duty tube or box construction Double flanged wheels Rotating axle drive wheel …

  • Single girder overhead crane from DQCRANES | Hoist ...

    Apr 26, 2016· Bridge Girder(s) – The principal horizontal beam of the crane bridge which supports the trolley and is supported by the end trucks. Runway – The rails, beams, brackets and framework on which the crane operates. Runway Rail – The rail supported by the runway beams on which the crane …

  • Lifting safety - EHS DB.com

    Lifting equipment is any work equipment for lifting and lowering loads, and includes any accessories used in doing so (such as attachments to support, fix or anchor the equipment). There are three key terms used in reference to the Regulations: 'lifting equipment';'lifting operations'; and 'the load'. Examples of lifting equipment include: overhead cranes and their supporting runways patient ...

  • Crane Comp Drawings and Spec CSL-1002-0407

    END TRUCKS The end trucks are rigid steel weldments, reinforced at the wheel axles. The wheels are solid forged steel and rotate on two lifetime-lubricated ball bearings. The single flange wheels have compound tread for operation on American standard taper tread or flat flange beams. The spur reduction at the truck is accomplished by

  • Hoosier Crane | HSI 1/2 Ton Wall Bracket Tie Rod Jib Crane ...

    Manufacturer Part Number 311-1000-12. Availability Call for Price. Special Price $916.50 Regular Price $1,079.00. Quick overview. HSI Model 311 1/2 Ton Wall Bracket Tie Rod Jib Crane 12 Foot Span. Learn more. Send to a friend. Add to Favorites. Skip to the end of the images gallery.

  • End Trucks - Overhead Crane Kits

    Our overhead bridge crane end trucks are ideal for the do-it-yourselfer. View as Grid List Sort by Price: Low to High Price: High to Low Name: A to Z Name: Z to A

  • EMH End Trucks | EMH, Inc.

    EMH end trucks are high quality components, designed for reliability and economy. The steel structure of the end truck is a torsion-resistant box girder, prepared to be connected to the crane girder. Precise machining and exact alignment of the crane girder mounting plates ensure unsurpassed travel characteristics and long life.…

  • Ace Industries Inc. - Festoon System Parts & Accessories

    Festoon System Parts & Accessories. Results (31) Filter ». Sort By: Best Selling Relevance Low Price High Price Name A-Z. Products per page: 12 24 48 View All. DUCT-O-WIRE SINGLE WHEEL TROLLEY FOR ROUND CABLE (.045" - 0.91" DIAMETER) R-TR4A. Price: $13.00.

  • Single Girder Overhead Cranes_Cranes & Components_Nanjing ...

    Oct 13, 2018· 9.End Trucks | End Carriages | End Beams Located on either side of the span in cement column or metal bracket, the end trucks with gear motors house the wheels on which the entire crane travels. There are two sets of end trucks and gearboxes for one set of single girder overhead crane, specially designed gearbox adopts oblique gears and self ...

  • TM—Single Girder Top Running Motorized End Trucks

    • Longer or shorter end truck lengths are available—consult factory. TP—Single Girder Top Running Push End Trucks TP end trucks provide similar benefits to the top running motorized TM truck, but with push operation. Along with many important features, end truck kits include: two trucks; rubber bumpers; and bridge beam fastener set.

  • Specifications &Dimensions|Overhead Cranes|Cranes…

    Double Girder Overhead Traveling Cranes. This double girder overhead crane can be installed on traveling rails on the brackets of building pillars. The double rail type trolley runs along parallel girders suitable for larger capacity cranes, and also can utilize space below ceiling rafters, and so a …

  • Wall Bracket & Tie Rod Jib Cranes | Materials Lifting ...

    Boom is supported by a threaded tie rod connected to the boom at one end and connected with a bracket to the supporting wall or column at the other end. Capacity is the maximum weight the crane can support; this includes the trolley and hoist as well as the lifting load. Span is the distance from the pivot point to the end of the boom.